Anaconda Garden Zip Wire Kit
Suitable for both Domestic and Commercial use this Zip Wire Kit is quite simply the Rolls Royce of all Zip Wires.
We have uniquely sourced every component from a selection of specialist manufacturers within the UK and Europe to create the ultimate Zip Wire which can be used in large gardens, Farm shops, Play parks, Caravan parks and Holiday centres.
Our Anaconda Zip Wire Kit comes complete with everything you need to get you up and flying.
Installation is easily carried out with the supplied instruction manual and will take two people approx 60-90 minutes. You will require a mounting point at each end of the run which will idealy be trees but you can mount your own wooden (telegraph type) poles which can be purchased from Total Poles (Kent area) or construct your own wooden mounting frames.
You will be required to drill mounting holes through the trees/poles but we offer an optional 600mm Masonry Drill Bit Set to carry this out.
Alternatively, you can also mount one end of your Zip Wire to a building with the use of our optional Wall Mount Bracket.
10mm wire rope and fixings - 2,830lb Working Load Limit (202 Stone)
What's in the box:
- Stainless Steel Braked Trolley
- 10mm Galvanised Steel Cable (length as chosen)
- Stainless Steel 3m Brake Spring
- Galvanised Cable Tensioner
- Galvanised Cable Holding Device
- Rubber Seat with Chain and Rubber Sleeve
- Instruction Manual
Conforms to EN1176 Playground Equipment Standard (Parts 1 & 4). Therefore, will pass a ROSPA inspection when installed correctly.